Initial Settings; Making Initial Settings - Ricoh fax4700l Operator's Manual

GETTING READY

INITIAL SETTINGS

Note
• Please consult your network
administrator to obtain the IP
address, subnet mask, and
default gateway settings.
Contents
GETTING AQUAINTED IC FAX Com
WITH NIC FAX Redirector
GETTING READY TROUBLESHOOTING
INTERNET FAXING APPENDIX
USING FUNCTIONS
GLOSSARY
Index
IC FAX Monitor
The procedure described here should be performed after NIC FAX is
connected to the LAN and the required mail server settings are com-
plete. The following describes the three initial settings:
IP address
The IP address is assigned to NIC FAX by your network adminis-
trator. An IP address is made up of four numbers, each of which is
in the range off 0 to 255, separated by periods.
Subnet mask
The subnet mask is assigned by your network administrator.
Default gateway
This is the address of the gateway (router) to which NIC FAX is
connected. The default gateway setting is required when connect-
ing to another network.

Making Initial Settings

Note
Press Function 6 0
Press 222261 .
∞
Press until the IP address
appears on the display.
Yes
Press .
26
.
SYSTEM SET
SYSTEM SET NO.:
61INITIAL SET 62FUNCTION SET
63U. PARAMETER 71PERS. CODE ↓
OWN NUMBER <G3>
YES TO SET
NO TO CANCEL
IP ADDRESS
YES TO SET
No TO CANCEL
-
NO TO CANCEL
OR NO
-
PREVIOUS ↑
NEXT ↓
PREVIOUS ↑
NEXT ↓