Ricoh fax4700l Operator's Manual page 377

SENDING A FAX MESSAGE
Economy Transmission
This feature is similar to Send Later. However, it has the added bonus of
automatically combining two cost-saving features: use of off-peak rates, and Batch
Transmission. Also, you do not have to input the required transmission time every
time, like you do with Send Later. However, with Send Later, you can input a
different time of transmission for each fax message.
If you select Economy Transmission, your fax message will be sent at the time that
you previously stored for this feature using Function 72 (see the next page). Also,
all messages that were stored for sending to the same destination using this
feature will be batched automatically.
Cross-references
Sending at a Specific Time: see page 28.
On/Off Selection Switch
When OPT is displayed.
1. Press T, 0 and 9.
If you have previously
programmed this feature as
a User Function Key, press that
key.
2. If you wish to change the ECONOMY
TRANS. setting, press W or V until the
displayed setting is correct.
3. Yes when you have finished.
32
ROUTINE OPERATION
Batch Transmission: see page 92.
← → YES TO END
ECONOMY TRANS.
ON OFF