Ricoh fax4700l Operator's Manual page 460

ADVANCED FEATURES
The number of RTI/CSI/G4 TID's that you can store for use with this feature is 10.
You can use Wild Cards to extend the number of RTI/CSI/G4 TID's that you can
specify.
Note: If one of the senders changes their RTI/CSI/G4 TID, you have to change
the stored RTI/CSI/G4 TID also. Otherwise, messages from that sender
will no longer be sent to the required cassette.
Cross-references
RTI and CSI: see page 287.
Programming the Specified Cassette Selection Feature
1. Function 6 0 2 2 2 2 8 and 6.
DEST.6 on the opposite display shows
that there are 6 RTIs/CSIs/G4 TIDs
programmed so far. In a new machine,
you will see DEST.0.
At this time, you can print a Specified
Cassette Selection List by pressing
Start.
2. Either:
Store some RTIs/CSIs/G4 TIDs: 1.
Go to step 3.
View the RTIs/CSIs/G4 TIDs that
you have stored so far: 2. Go to
step 6.
3. Type in an RTI, CSI or G4 TID using a
Quick Dial Key or the ten key pad then
press Yes.
4. Either:
Store this RTI as a wild card: Yes.
Otherwise: No.
5. Either:
Enter another RTI, CSI G4 TID: Go to step 3.
Finish: Function.
6. Scroll through the stored RTIs/CSIs/G4 TIDs on the screen with .
It is not possible to edit previously stored RTIs/CSIs/G4 TIDs; if you wish to
do so, you must delete the incorrect label and store a new one.
Journal: see page 171.
Wild Cards: see page 118.
CST SELECT
1.RTI PROG 2.RTI
CST SELECT
CST SELECT
XYZ. CO.
CST SELECT
CST SELECT
SELECT _
PRINT LIST →
DEST.6
NO TO CANCEL
ENTER RTI/CSI
NO TO CANCEL
_
NO TO CANCEL
DEST.1/6 CLR: CLR
STORE AS WILD CARD? YES
XYZ. CO.
ENTER RTI/CSI
NO TO CANCEL
_
RECEPTION
A BC
↓
• NO
A BC
115