Ricoh fax4700l Operator's Manual page 265

APPENDIX E
3. Input your ISDN number for Group 4 communications.
The format of the number must be as follows: International Dial Prefix,
Your Country Code, Your Area Code, then you must input a Pause, followed
by your telephone number. After that, if your ISDN G4 number contains a
subaddress, type a slash followed by the subaddress number.
Check the International Dialing Prefix and the Country Code with your local
telecommunications operator. The example shown below is for the USA; the
codes to add are 011 and 1.
Use the Pause key to add a pause.
To type the backslash, you must have
programmed one of the User Function
Keys to input a subaddress (see page
148 for how to program a User Function
Key). Press that User Function Key to
input the slash, then input the
subaddress.
4. Yes Function.
Own ISDN-G3 Number
You can also make Group 3 communications over the ISDN. This procedure is for
storing your machine's own telephone number for Group 3 communications over
the ISDN.
1. Function 6 0 2 2 2 2 6 1 then
screen is as shown opposite.
2. Yes.
3. Input your ISDN number for Group 3 communications.
The format of the number must be as follows: International Dial Prefix, Your
Country Code, Your Area Code, then you must input a Pause, followed by
your telephone number. After that, if your ISDN G3 number contains a
subaddress, type a slash followed by the subaddress number.
Check the International Dial Prefix and your Country Code with your local
telecommunications operator. The example shown below is for the USA; the
codes to add are 011 and 1.
Use the Pause key to add a pause.
254
OWN ISDN-G4 NUMBER
YES OR CLR
0111212-5551234/2468
m
until the
OWN ISDN-G3 NUMBER
YES TO SET
NO
OWN ISDN-G3 NUMBER
_
• NO
_
PREVIOUS ↑
NEXT ↓
TO CANCEL
YES TO END