Ricoh fax4700l Operator's Manual page 605

APPENDIX E
Programming the Terminal ID
If you transmit using Group 4 mode, the Terminal ID (G4 TID) will be printed on
the top of the messages of receivers.
G4 Terminal ID consists in "Country Code", "-", "Telephone Number" "=" "Terminal
ID Code". Terminal ID Code is normally sender's name. You cannot program more
than 22 characters.
1. Function 6 0 2 2 2 2 6 1 then
screen is as shown opposite.
2. Press Yes.
3. Enter the country code.
4. Press Yes.
5. Enter your machine's telephone number.
6. Press Yes.
7. Enter the terminal ID code.
8. Yes and Function.
260
until the
G4 TID
-=
1
G4 TID
1-=
-
G4 TID
1-=
- 2125551234
G4 TID
1-2125551234=
=
G4 TID
1-2125551234=
- ZY COMPANY
YES OR CLR • NO
YES TO END
YES OR CLR • NO
YES TO END
YES OR CLR • NO