Ricoh fax4700l Operator's Manual page 193

LOOKING AFTER THE MACHINE
Loading Paper in the Optional Side Paper Feed Unit
1. Slide out the side paper feed unit until it
stops. With both hands, remove it by
holding it up and lifting it out at the same
time.
2. Press down the metal base plate until it
clicks into place.
3. Fan the paper. Make sure the edges are
uniformly aligned and place the paper
into the unit with the side on wish you
wish to print face up. Check the paper
fits under the metal corners.
Make sure the back fence is set in the
groove on the paper cassette.
4. If there is space between the paper and
fences, the paper will not be fed prop-
erly. To avoid this, carefully move in
each fence until it is flush with the paper.
Do not fill up the cassette past the load
limit marker.
5. Replace the feed unit to its original posi-
tion.
182