Ricoh fax4700l Operator's Manual page 312

Transmission Using Upgraded Quick Dials
1. Place the document, then select the scanning condition.
2. Press the User Function key in which the number is programmed as Upgraded
Speed Dial key.
3. Enter the number (100 to 999) in which the destination is stored from the ten
key pad.
Then the label name or number is displayed.
4. Make sure if you select the correct destination, and press Yes.
5. Press Start.
Editing an Upgraded Speed Dials
Change the number or label which is stored already.
1. Press Function.
2. Press 3 and 7.
3. Enter the stored number (100 to 999)
which you wish to change from the ten
key pad.
If you enter the wrong number, press No
to enter the correct number or search
the correct number using
4. Press Yes.
5. Edit the number. If you enter the wrong
telephone number, press Clear or No to
enter the correct number.
Clear --- Erase one character at the
cursor.
No --- Erase all.
6. Press Yes.
The fax number is changed.
Proceed to step 8 if you do not change
the label.
7. Edit the name. Press Clear or No to edit.
Proceed to step 9 if you do not change
the label.
im
.
SPD DL UPGR ENTER SPEED CODE
PRINT LIST →
N
_
NO TO CANCEL
SPD DL UPGR YES OR NO
100
N
SPD DL UPGR YES OR NO
100
N
ABC
SPD DL UPGR YES OR NO
100 ABC
N
123-4567
SPD DL UPGR YES OR CLR
100
N
ABC_
SPD DL UPGR YES OR CLR
100
N
ABC_
APPENDIX F
↑
↓
↑
↑
↑
↓
• NO
ABC
•
NO
ABC
301