Ricoh fax4700l Operator's Manual page 737

GETTING READY
Contents
GETTING AQUAINTED IC FAX Com
WITH NIC FAX Redirector
GETTING READY TROUBLESHOOTING
INTERNET FAXING APPENDIX
USING FUNCTIONS
GLOSSARY
Index
IC FAX Monitor
Use the Quick Dial keys and
Ten-Key Pad to input the
mail address you want to
send to.
(@), period, underline, and hyphen can be input directly with
the Quick Dial keys. The symbols can be input when a
bol
key is pressed. Use
and lower-case characters.
Letters and symbols will not be input if you press the Quick
Dial keys while the Mail indicator is not lit.
Press Yes .
This confirms the mail address as shown on the display and
causes the Mail indicator to go out.
Press Start.
This starts reading of the document into memory. The mail send
operation starts after the read operation is complete. The
municating indicator is lit while a send operation is in progress.
It may take some time before the send operation starts. This is
due to the time the machine requires to convert the data in
memory.
Check that the sent mail
was delivered properly.
Note that mail is picked up in accordance with the Mail RX
Interval (page 58).
68
MEMORY TRANS.
PRESS YES OR CLR • NO
design@abc.company.com
Shift
to shift between upper-case
MEMORY TRANS.
ENTER NO. OR START DEST:
<G3>
STORING
PAGE 1
FILE NO.3116
MEMORY TRANS. nicfax@abc.company.com
SET DOC. OR ENTER FAX NO.
OPTIONS ↓
Sym-
OPTIONS ↓
2
MEMORY 98%
Com-
MEMORY98%