Function 63 - User Parameters - Ricoh fax4700l Operator's Manual

USING FUNCTIONS
FUNCTION 63 -
USER PARAM-
ETERS
Contents
GETTING AQUAINTED IC FAX Com
WITH NIC FAX Redirector
GETTING READY TROUBLESHOOTING
INTERNET FAXING APPENDIX
USING FUNCTIONS GLOSSARY
Index
IC FAX Monitor
User Parameters appear on the display as a series of on/off switches
that can be used to configure a number of features.
When installation of options or functions requires other on/off
settings besides User Parameter settings, make the other settings
first before making the User Parameter settings.
The factory default setting is _ (underline).
Switches and Bits
Each User Parameter switch represents a bit (digit) of an eight-bit
binary number. Each bit is referred to by its relative position, with
bit 0 on the far right and bit 7 on the far left. Each bit can be either
0 or 1, and the status of each function is determined by the value
of the corresponding bit.
Switch : 0 0 : 0 1 0 0 0 0 0
• • • • • • •
• • • • • • •
7 6 5 4 3 2 1 Bit numbers
109