Ricoh fax4700l Operator's Manual page 573

ON/OFF SWITCHES AND USER PARAMETERS
Switch 12 Various
Digit
0, 1 Do not change these settings.
Toner Saving Mode
Note: If on, contrast will be set to "Normal" automatically, preserving image quality.
This is available when receiving fax messages and printing reports, but not for
copying or printing from a PC. Further, messages sent to you in halftone mode will
2
automatically turn off toner saving to insure a clear image. To make sure that the fax
quality is acceptable with toner saving on, print a few reports (See page 171 ).
Note: If the sender is using a machine made by another manufacturer, toner saving
will stay on and this could lower image quality.
Density of the printing image
3, 4
5, 6 Do not change these settings.
7 Copying
Switch 13 Do not change these settings
Digit
0 to 7 Do not change these settings.
228
Purpose
0: Off*
Digit 4 Digit 3 Setting
0 0 Normal *
1 0 Darken
0: Possible* 1: Not Possible
Purpose
TECHNICAL REFERENCE
1: On
Digit 4 Digit 3 Setting
0 1 Lighten
1 1 Do not use
these settings