Specified Cassette Selection (Optional Paper Feed Unit Required) - Ricoh fax4700l Operator's Manual

ADVANCED FEATURES
m
2. Press until the settings for switch 02 are
shown.
The setting that you need to change is
digit 0.
3. If you wish to change the setting, press 0 on the ten key pad.
4. Finish: Yes and Function.

Specified Cassette Selection (Optional Paper Feed Unit Required)

Overview
This feature is only available if your machine has more than one cassette. Using
this feature, you can direct fax messages from certain senders to be printed from
the upper cassette.
Example:
Put yellow paper in the upper cassette. Then, messages from head office can be
printed out on yellow paper; this will make it easy for you to see when a message
from head office has arrived.
To direct messages from a particular sender to a special cassette:
Program the RTI, CSI or G4 TID of the sender. (Ask the sending party what
their RTI/CSI is. Or make a communication with that terminal, print a TCR, and
read off the RTI/CSI/G4 TID.)
If the other party is using a machine made by another maker, they may not be
familiar with the terms RTI, CSI or G4 TID. Explain that you are interested in
the telephone number that they stored in the machine for identification
purposes.
Switch Specified Cassette Selection on.
Select the messages to be printed from upper cassette.
a) All messages from specified senders
b) All messages except those from specified senders.
If the RTI/CSI/G4 TID is not the same as any of those that you have programmed
into this feature, the incoming message will be printed on paper from the
normally-used cassette.
SWITCH02: 0000 0000
Digit 0 (Double Underlined)
0: Forwarding Mark is Off
1: Forwarding Mark is On
RECEPTION
119