Ricoh fax4700l Operator's Manual page 98

ADVANCED FEATURES
Operating the Machine with Restricted Access Switched On
If you have switched Restricted Access on, the display is as shown below when
the machine is in standby mode.
Before you can use the machine, you must enter your personal code that you
have already registered in the machine. See page 82 for how to store Personal
Codes.
1. Either:
Enter your personal code.
Example: 7 3 6 2 from the ten key
pad.
Press the Quick Dial key where the
personal code programmed.
2. After a second, the normal standby display will appear, and you can use the
machine. If the normal standby display does not appear, you entered a
personal code that is not stored in the machine.
If you decide that you do not wish to use the machine now, you should return the
machine to Restricted Access standby mode. To do this, either:
Insert a page into the document feeder and remove it immediately.
Press Function twice.
TRANSMISSION
RESTRICTED ACCESS
CODE
DEC. 4.11:50AM
ENTER CODE
87