Ricoh fax4700l Operator's Manual page 383

SENDING A FAX MESSAGE
Using the AI (Artificial Intelligence) Redial Key
The machine learns and remembers the last 10 telephone numbers that you input.
Then, if you have to redial one of these numbers, just press the AI Redial key
until the number or name of the party you wish to redial is displayed, then press
the Start key.
This feature has the following uses.
If the machine is waiting to redial the other party, you do not have to wait for the
redialing interval to expire. Press the AI Redial key until the required telephone
number or name is displayed, then press the Start key.
If you wish to send another message to the same address that you just sent
one to recently, you don't have to dial the full number again if it is still in the AI
Redial memory. Place the message in the feeder, then press the AI Redial key
until the required telephone number or name is displayed, then press the Start
key.
Notes:
AI Redial only remembers one Quick Dial or Speed Dial number --- the last num-
ber dialed. When you dial another Quick Dial or Speed Dial, the previously dialed
Quick Dial/ Speed Dial cannot be accessed.
Using AI Redial, you cannot retry a failed Memory Transmission.
However, you can redial the telephone number, as explained above.
AI Redial employs the AI Short Protocol feature.
The AI Redial key does not work if you used the handset to dial.
Cross-reference
To send a fax using AI Redial, do the following:
1. Make sure that the machine is in standby
mode (see page 16).
2. Place your document into the feeder.
3. AI Redial.
4. Scroll through the numbers in the AI
Redial memory using the U and T ar-
rows of the scroll key.
To select a number: Yes x 2.
5. Either:
Select another number: go to step 4.
Start the transmission: Start.
38
AI Short Protocol: see page 166.
ROUTINE OPERATION
AI REDIAL NO.DIRECTORY
1 SCROLL ↓
PRESS YES OR NO
01 XYZ CO. NEW YORK
MEMORY TRANS.
ENTER NO. OR START
_
OPTION ↓
DESP:2