Ricoh fax4700l Operator's Manual page 149

OTHER
m
3. Press , 0 and 5.
4. Enter the ID code that you wish to use for
this message.
Example: 2 5 6 7 from the ten key pad.
5. Yes.
6. Start.
Your fax message is stored and held
on polling standby.
Note: If you see SAME ID FILE EXISTS CLEAR? PRESS YES
ready have a message on Secured Polling Standby.
To erase the old message: Yes. The old message is erased and
your new one is stored.
To keep the old message: No. Input another ID Code.
NOTE: If you need to cancel a polling transmission operation, use Function 23
(see page 144).
138
ADVANCED FEATURES
ID CODE ENTER ID CODE
_
ID CODE PRESS YES OR NO
2567
POLLING TRANS.
PRESS START
NO TO END
↓
OPTIONS
NO, you al-
•