Ricoh fax4700l Operator's Manual page 498

ADVANCED FEATURES
Transfer Request Program Sheet
You can use this sheet when you make a Transfer Request.
1. At the top of the sheet, next to Trans. Mode, mark up either the box above
"Memory" or the box above "Immediate".
2. Mark up the required contrast, resolution. Also, indicate whether your
transmission is in Group 3 or Group 4 mode.
3. Input the number of the Transfer Broadcasting Station. To do this, either:
Write the full telephone number of the Transfer Broadcasting Station in the
"Transfer Station (Full No.)" field. See "Number Fields" on page 148 for how
to write numbers on OMR Sheets.
Mark one of the Quick Dials in the "Transfer Station (Quick Dial)" row of
boxes.
Mark one of the Speed Dials in the "Transfer Station (Speed Dial)" row of
boxes.
Note: You can only enter one Transfer Broadcasting Station on the OMR
Sheet. Refer to page 80 and the pages following for all conditions
required to perform a Transfer Request.
4. Mark the end receivers.
You must mark the end receivers as Speed Dials, Quick Dials, and Groups
that are stored in the Transfer Broadcasting Station. Do not input any of
your own stored Quick Dials, Speed Dials, or Groups here.
Confer with the operator of the Transfer Broadcasting Station if you need
their latest list of stored telephone numbers.
Example: If one of the end receivers is stored in the Transfer Broadcasting Station
as Speed Dial 10, mark the box above 10 in the "Receiver (Speed Dials in Transfer
Station)" area.
OTHER
153