Ricoh fax4700l Operator's Manual page 228

SOLVING PROBLEMS
Problem
Frequent original misfeeds
Transmission cannot take
place; CLEAR ORIGINAL
appears.
Action Required
Multifeeds
Incorrect positioning of originals
•
Put the document in the feeder correctly.
See page 24.
Incorrect alignment of originals
•
Align the edges of the document. See page 24.
Curled pages
•
Flatten the document. See page 21.
Incorrect document type
•
Use a proper document type. See page 21.
Mixed document types
•
The pages must all be of the same type.
Static electricity on the originals
•
Shuffle the document. See page 24.
User maintenance is needed
•
Do user maintenance, especially separation pad [A].
See page 193.
The document feeder is not adjusted correctly.
•
Adjust the auto document feeder. See page 207.
Non-feeds
Copier silicone oil on the originals
•
Wait a few minutes, then try again.
Incorrect alignment of originals
•
Align the edges of the document. See page 24.
Curled pages
•
Flatten the document. See page 21.
Incorrect document type
•
Use a proper document type. See page 21.
More than 50 pages in the feeder
•
Do not place more than 50 pages in the automatic
document feeder at once.
User maintenance is needed
•
Do user maintenance, especially separation pad [A] and
roller [E].
See page 193.
The document feeder is not adjusted correctly.
•
Adjust the auto document feeder. See page 207.
The document is jammed in the feeder.
•
Remove the jammed document (see page 206)
and repeat the transmission procedure.
The document may be longer than the maximum limit
(see page 20).
•
Make sure that none of your originals exceed this
limit.
Do user maintenance, especially separation pad [A] and roller
[F] (see page 193).
•
If the same problem still exists after user
maintenance, adjust the auto document
feeder mechanism (see page 207).
OPERATING DIFFICULTIES
217