Ricoh fax4700l Operator's Manual page 728

GETTING READY
Contents
GETTING AQUAINTED IC FAX Com
WITH NIC FAX Redirector
GETTING READY TROUBLESHOOTING
INTERNET FAXING APPENDIX
USING FUNCTIONS
GLOSSARY
Index
IC FAX Monitor
Make the [TCP/IP] settings described below (1 through 3),
and then click [OK] .
1 [IP Address] , [Subnet Mask]
Make sure that these items are identical to those you input on
the NIC FAX control panel (page 26).
2 [Access Control]
Type in the IP address to which NIC FAX can connect when
using the PC FAX function. Leave this setting at 0.0.0.0 if you
don't need to use it.
3 [Access Mask]
Type in an access mask to limit the range of IP addresses that
can connect to NIC FAX. Leave this setting at 0.0.0.0 if you
don't need to use it.
Example:
Access Control : 192.168.15.16
Access Mask : 255.255.0.0
In this case, IP addresses that can connect to NIC FAX is:
192.168.xx.xx
59
, [Gateway]