Ricoh fax4700l Operator's Manual page 132

ADVANCED FEATURES
To delete the displayed RTI/CSI/G4 TID: Clear.
When you have finished: Function.
NOTE: Messages from senders that have RTI/CSI/G4 TIDs that match those
that were input using the above procedure will be printed using the
first (upper) paper cassette.
If there is no paper in the upper cassette, messages from the specified
senders will be stored in the memory (substitute reception).
If there is no paper in the lower cassette, messages from other
senders will be stored in the memory.
Selecting Which M essages to Print from the Specified Cassette
You can select one of the following two things.
Print messages from the specified senders whose RTI/CSI/G4 TID are
programmed from the upper cassette.
Print all messages except those from the specified senders whose RTI/CSI/G4
TID are programmed from the upper cassette.
1. Function 6 0 2 2 2 2 6 and 3.
The settings for switch 00 are now
shown on the bottom line of the display.
2. Press m until the settings for switch 08 are
shown.
The settings that you need to change
are digit 4 (double underline) and 5
(single underline).
3. Set one of the two as shown opposite
Press 4 on the ten key pad to change
the setting of digit 4. Press 5 to change
the setting of digit 5.
4. Finish: Yes and Function.
USER PARAMETER PRINT LIST
DEFAULT: 01000000
YES TO END ↓
SWITCH00: 01000000
USER PARAMETER PRINT LIST
DEFAULT: 01000000
YES TO END ↓
SWITCH08: 01000000
If you want to print all incoming mes -
sages from the specified senders.
SWITCH08: 00 01 0000
If you want to print all incoming mes -
sages except those from the specified
senders.
SWITCH08: 00 11 0000
RECEPTION
→
↑
→
↑
121