Displayed Error Messages - Ricoh FAX4800L Operator's Manual

SOLVING PROBLEMS

DISPLAYED ERROR MESSAGES

The following messages may appear while you are operating or programming the
machine.
NO BOOKING FOR POLLING
RECV
NO TRANS FILES EXIST
NO POLLING DOCUMENTS
EXIST
NO DISK FILE FOUND
DISK FILE NOT FOUND
THIS FILE DOES NOT
EXIST
TOO MANY DEST
DOCUMENT IN USE
USED AS GROUP
USED AS PROGRAM
USED AS QUICK DIAL
USED AS SPEED DIAL
USED AS PERSONAL CODE
USED AS AUTO DOC.
WAIT
NOT ADDED
NOT ADDED!
OVERFLOW
NOT PROGRAMMED
No polling reception operations have been programmed.
There are no messages in memory waiting for transmission.
There are no messages in memory waiting to be polled.
The disk file is empty.
No messages have been found in the disk file.
Incorrect file number. Check the file number and try again.
The memory cannot hold any more telephone numbers.
Either: Delete some numbers then try again.
Or: Wait until some of the Send Later or other delayed
transmissions waiting in memory have been carried out, then
try again.
This message is now being sent. You cannot print it now.
This Quick Dial Key has a Group stored in it.
This Quick Dial Key has a Keystroke Program stored in it.
This Quick Dial Key has a telephone number stored in it.
This Speed Dial code has a telephone number stored in it.
This Quick Dial Key has a personal code stored in it.
This Quick Dial Key or Speed Dial code has an auto document
stored in it.
Please wait.
The telephone number was not stored, because either:
You cannot add any more numbers to this Group.
The digit, pause, or other symbol that you just attempted to
input was rejected because it is inappropriate.
The telephone number was not stored, because you cannot
store any more full telephone numbers at the moment.
Either: Delete some numbers from the machine to make room,
then try again.
Or: Store this number as a Quick or Speed Dial before trying to
use it.
Or: Wait until some of the Send Later or other delayed
transmissions waiting in memory have been carried out, then
try again.
There is no room in the machine's memory for any more
telephone numbers.
Either: Delete some numbers from the machine to make room,
then try again.
Or: Wait until some of the Send Later or other delayed
transmissions waiting in memory have been carried out, then
try again.
Either:
This Quick Dial Key or Speed Dial Code does not contain a
number.
This Quick Dial Key does not contain a Keystroke Program.
DISPLAYED ERROR MESSAGES
215