Ricoh fax4700l Operator's Manual page 362

SENDING A FAX MESSAGE
Sending to More Than One Location (Broadcasting)
1. Make sure that the machine is in standby mode (see page 17).
2. Make sure that the Memory indicator is lit. If it is not, press Memory.
3. Place your fax message face down into the feeder.
You can dial without placing the
message in the feeder first. Place
the document after you dial the
number and go to step 5.
Cross-references
Sending a Page with Very Fine Detail: See page 23. Options for Sending a Message: See page 27.
Scanning only a part of the document (Specified Image Area): See page 86.
4. Dial in one of the following ways.
a) Ten Key Pad
1: Method 1: Press the Quick Dial Key the Group is stored in (in the example, press key 08).
Method 2: If you do not know which Quick Dial Key the Group is stored in but you do know the
Group number, use Method 2. You must have programmed one of the User
Function keys in advance with code 02 (Group Dial), using Function 35 (see
page 148). In the above example, F4 has been made the Group Dial key; press F4
then input the Group number.
18
b) Quick Dial c) Speed Dial
MEMORY TRANS.
ENTER FAX NUMBER
_
ROUTINE OPERATION
MEMORY TRANS. OPTIONS
ENTER FAX NUMBER
MEMORY TRANS. OPTIONS
PRESS YES OR CLR • NO
2125551234
_
d) Group Dial
Example: Group 1,
stored in Quick Dial
Key 08
Method 1: 08
Method 2: F4 0 1
↓
OPTIONS
↓
↓
1