Ricoh fax4700l Operator's Manual page 649

APPENDIX F
3. Yes.
Now, you can either:
Use another module (press a key from 1 to 5).
Start working on another Group (press Yes then go to step 2 of the procedure
on page 300).
Reutrn to standby mode by pressing Function.
Erasing the Group
This procedure deletes this Group and all the numbers stored in it. The Speed
Dial Codes and Quick Dial Keys that you used in this Group will not be deleted
from the memory; you can continue to use them for other purposes.
First, enter Group Programming mode as explained on page 300. Then:
1. Press 5.
2. Either:
To delete the Group: Yes.
To keep the Group: No.
Now, you can either:
Use another module (press a key from 1 to 5).
Start working on another Group (press Yes then go to step 2 of the procedure
on page 300).
Return to standby mode by pressing Function.
304
GROUP DIAL
G 01 08 DEST. 0
1.ADDRESS 2.CHECK 3.LABEL
GROUP DIAL
G 01 08 WILL BE ALL CLEARED
CLEAR? YES NO
•
GROUP DIAL
G 01 08 DEST. 0
1.ADDRESS 2.CHECK 3.LABEL
SELECT _
YES TO END
↓
SELECT _
YES TO END
↓