Ricoh fax4700l Operator's Manual page 402

ADVANCED FEATURES
Storing the Remote ID
As a new machine has a Remote ID of 0000 when it leaves the factory, we
recommend that you store a new Remote ID immediately. This remote ID is also
used as the password for Fax on Demand.
1. Function 6 0 2 2 2 2 6 1 then
screen is as shown opposite.
2. Yes.
3. Press No then input the new Remote ID
that you will be using. Example: 6 7 5 4.
4. Yes Function.
Switching Transfer Request by Remote Transfer On/Off
To switch this feature on or off, do the following. (See page 10 for more
information about the User Parameter settings adjustment procedure).
1. Function 6 0 2 2 2 2 6 and 3.
2. The settings for switch 00 are now shown
on the bottom line of the display.
3. Press until the settings for switch 11 are
shown.
The setting you need to use is digit 0.
4. If you wish to change the setting, press 0.
5. Finish: Yes Function.
until the
REMOTE ID
YES TO SET
NO
REMOTE ID
YES OR CLR
0000
REMOTE ID
YES OR CLR
6754
USER PARAMETER
DEFAULT:
SWITCH00:
SWITCH00:
SWITCH11:
Digit 0
0: The feature is disabled.
1: The feature is enabled.
NETWORKING
PREVIOUS ↑
NEXT ↓
TO CANCEL
• NO
• NO
PRINT LIST →
01000000
YES TO END ↓
01000000
00000000
00000000
↑
57