Ricoh fax4700l Operator's Manual page 446

ADVANCED FEATURES
5. Either:
Enter another RTI, CSI or G4 TID: Go to step 3.
Finish: Function.
6. Scroll through the stored RTIs/CSIs/G4 TIDs on the screen with .
It is not possible to edit an RTI/CSI/G4 TIDs; if you wish to do so, you must
delete the incorrect entry and re-input it.
To delete the displayed RTI/CSI/G4 TIDs: Clear. Go to step 2.
When you have finished: Function.
Selecting Which Messages to Lock in Memory
You have to select one of the following:
Lock all messages from specified terminals.
or
Lock all messages except those from specified terminals.
1. Function 6 0 2 2 2 2 6 and 3.
At this time, you can print a User
Parameter List if you press
2. The settings for switch 00 are now shown
on the bottom line of the display.
3. Press until the settings for switch 09 are
shown.
4. The setting that you need to change is
that for digit 0 (double underlined) and 1
(underlined).
Set one of the two as shown opposite.
USER PARAMETER
DEFAULT:
and Start.
SWITCH00:
USER PARAMETER
DEFAULT:
SWITCH09:
When you want to lock incoming mes-
sages in memory from specified termi-
nals;
SWITCH09: 0000 0001
If you want to lock all incoming mes-
sages except those from specified termi-
nals;
SWITCH09: 0000 0011
RECEPTION
PRINT LIST →
↑
01000000
YES TO END ↓
01000000
PRINT LIST →
↑
01000000
YES TO END ↓
01000000
101