Ricoh fax4700l Operator's Manual page 568

TECHNICAL REFERENCE
On/off switches available in this menu are
1 Line Type (PSTN)
2 Authorized Reception
3 Power Saver
4 Summer Time/DST
5 RDS
6 File Retention Time
1
( : Optional Function Upgrade Card and Hard Disk required,
Feed required)
User Parameter Settings
A wide range of features can be switched on or off by using the User Parameters.
However, this feature is more difficult to use than the On/Off Switches. The
switches and adjustments are presented on the screen as rows of digits. Each
digit can be either 0 or 1. Each feature is allocated one or more digit. The value of
the digit determines the status of the feature.
The overall procedure is explained below. However, each of the adjustments that
can be made using this procedure are explained in the relevant parts of the
manual.
1. Function 6 0 2 2 2 2 6 and 3.
At this time, you can print a User
Parameter List if you press
Start. The current settings for
switch 00 are now displayed on the
bottom line of the display. If the set-
tings for this switch are the way
that you want them, go to step 3.
2. To change the required setting, press a
number from 0 to 7 corresponding to the
digit that you wish to change.
Example: 0 on the ten key pad. The
value of the digit changes, in this case
from 0 to 1.
Each switch contains 8 digits, which act as on/off switches for various
features. The digits are numbered from 7 to 0; the setting of digit 7 is shown
at the left side of the display and digit 0 is at the right.
Feature
and
ON/OFF SWITCHES AND USER PARAMETERS
7 Memory Lock
8 Forwarding
9 Multi-sort Reception
1
10 Disk Filing
11 Cassette Selection
USER PARAMETER
DEFAULT: 01000000
SWITCH00: 01000000
USER PARAMETER
DEFAULT: 01000000
SWITCH00: 01000001
Feature
2
2
: Optional Paper
PRINT LIST →
↑
YES TO END ↓
PRINT LIST →
↑
YES TO END ↓
223