Ricoh fax4700l Operator's Manual page 561

DISPLAYED ERROR MESSAGES
THIS CODE DOES NOT
EXIST
FAX NO NOT PROGRAMMED
NO DATA PROGRAMMED
ALREADY PROGRAMMED
OVER NO OF PROG RTI/CSI
RTI/CSI IS NOT
PROGRAMMED
NO PAUSE
SWITCH OFF AFTER PRINT
OUT
NOT CHANGEABLE
(FORWARDING)
(MEMORY LOCK)
(RDS)
ADD TONER
ADD PAPER IN CASSETTE
NO._
CHECK ID
COMMUNICATION FAIL
CLEAR ORIGINAL
CLEAR COPY
CLOSE COVER
UNABLE TO USE PRINTER
UNABLE TO PROGRAM
O
SERVICE CALL -
SET TONER
TONER NEAR EMPTY
216
This personal code has not been programmed.
There are no fax numbers stored in this Group.
The Group that you tried to erase does not contain any fax
numbers.
Either:
This number is already included in this Group.
This RTI/CSI has already been stored for use with this feature.
You cannot store any RTIs or CSIs for use with this feature; the
limit has already been reached.
No RTIs or CSIs have been stored for this feature.
You must add a pause after your area code when you input
your fax terminal's own telephone number.
You cannot switch Memory Lock off while there is a received
fax message in the memory. You must input the Memory Lock
ID and print the message first before switching Memory Lock
off.
You cannot change the setting of this feature.
If displayed under SET DOCUMENT in standby mode, this
indicates that Forwarding is now switched on.
If displayed under SET DOCUMENT in standby mode, this
indicates that Memory Lock is now switched on.
If displayed under SET DOCUMENT in standby mode, this
indicates that RDS is now switched on.
The toner cartridge is empty. Install a new cartridge.
The indicated cassette is now empty.
The ID that you entered is not correct. Try again.
There was an error during a transmission or reception. Check
the error report.
A document is jammed in the feeder.
Paper is jammed in the printer.
A cover is not closed properly. Check that all covers are closed.
Machine cannot print out a list/file, because the heater is not
warm enough or plotter is not ready.
This Quick Dial Key already contains a number. Try another
Quick Dial Key.
OO
H
Machine is out of order. Contact your service representative.
No toner cartridge. Install a cartridge.
The toner cartridge is nearly empty.
SOLVING PROBLEMS