Ricoh fax4700l Operator's Manual page 295

APPENDIX F
1. Either:
If you enter the CSI from the
standby mode, press Function, 6,
0, 2, 2, 2, 2, 6, and 1. And then
press until the screen is as
m
shown opposite. Finally press Yes.
If you have just entered the CSI in
the previous procedure, press Yes.
2. Input your telephone number.
Example: 2125556789
Note: Not more than 20 digits.
If you wish to input a "+" sign by Quick Dial 31 or 63 (Symbol), to
signify your international dial access code (this is a common prac-
tice in Europe).
3. Yes and Function.
Telephone Line Type
If the setting of this feature is incorrect, you will not be able to dial using the
machine's keypad or automatic dialer.
There are two basic types of telephone company exchange:
Exchanges using Tone Dialing (also known as touch tone, DTMF, TT, or
sometimes PB)
Exchanges using Pulse Dialing (also known as rotary dial, PD or DP)
The telephone line type setting in your fax machine must match the type of
exchange that you are connected to. If you are not sure what type your local
exchange is, ask the telephone company.
Note: If there is a handset connected to your fax machine, make sure that it is
also set up in the correct dialing mode.
Change the line type setting for the fax machine using Function 62.
1. Press Function 6 0 2 2 2 2 6 and 2.
Make sure that the display is as shown
opposite
2. Change the setting by using
3. To finish, press Yes and Function.
284
CSI
CSI
CSI
PSTN LINE TYPE
or .
j k
PREVIOUS ↑
YES TO SET
NO TO CANCEL
_
YES OR CLR
212-555-6789
_
DP TT
YES TO END ↓
NEXT ↓
YES TO END
• NO
SELECT ← →
↑