Ricoh fax4700l Operator's Manual page 294

1. Either:
To enter the TTI from the standby
mode, press Function 6 0 2 2 2 2
6 and 1. Press
as shown opposite. Then press
Yes.
If you have just enter the RTI in the
previous procedure, press Yes.
2. Either:
Copy the RTI across and store that
as the TTI: 2. Then go to setp 4.
Input a new TTI or edit the TTI that
is already there: 1. Go to step 3.
3. Input the TTI that you will be using.
Example: XYZ COMPANY HEAD
OFFICE
Note: Not more than 32 characters.
Input and editing are explained
on page 4.
4. Yes Function
CSI (Called Subscriber Identification)
Your CSI appears on the other party's operation panel during communication
instead of your RTI, if the other party's machine is another manufacturer's
product. The CSI can have up to 20 characters (only numbers and spaces can be
used). Enter your fax machine's telephone number, because some features of
your machine may not work if the CSI is not the same as the telephone number.
until the screen is
m
TTI
PREVIOUS ↑
YES TO SET
NO TO CANCEL
TTI LABEL INSERTION
SELECT _ YES TO END
1.INPUT 2.COPY RTI
TTI
NO TO CANCEL
_
TTI YES OR CLR
XYZ CO. HEAD OFFICE
APPENDIX F
↓
NEXT
ABC
• NO
_ ABC
283