ROUTINE OPERATION
Immediate Transmission
Procedure
If you do not wish to store the fax message in memory before sending it out, use
the following procedure.
The advantages and drawbacks of Immediate Transmission and Memory
Transmission are discussed on pages 22 and 23.
1. Make sure that the machine is in standby
mode (see page 24).
2. Make sure that the Memory indicators
should go out. If it is lit, press Memory .
3. Place the document face down into the
feeder.
4. Dial (only one destination). And press Yes.
See page 25 for how to dial.
5. Start.
6. The machine dials and the line to the other party is connected. The number
that you dialed is displayed (or if you used Quick Dial or Speed Dial, the Quick
Dial or Speed Dial Label stored for that number is displayed).
Converting Immediate Transmission to Memory Transmission
If there is a message still waiting in the document feeder, you can convert it into a
memory file if you press Memory and Start and Yes. The document will be
scanned and stored into memory, leaving the document feeder free for others to
use.
SENDING A FAX MESSAGE
ENTER FAX NUMBER
_
IMMEDIATE TX
PRESS YES OR CLR
•
2125551234
_
DIALING
2125551234
FILE NO.0046
↓
OPTIONS
↓
OPTIONS
NO
41