Ricoh fax4700l Operator's Manual page 75

NETWORKING
Storing the Remote ID
As a new machine has a Remote ID of 0000 when it leaves the factory, we
recommend that you store a new Remote ID immediately. This remote ID is also
used as the password for Fax on Demand.
1. Function 6 0 2 2 2 2 6 1 then
screen is as shown opposite.
2. Yes.
3. Press No then input the new Remote ID
that you will be using. Example: 6 7 5 4.
4. Yes Function.
Switching Transfer Request by Remote Transfer On/Off
To switch this feature on or off, do the following. (See page 10 for more
information about the User Parameter settings adjustment procedure).
1. Function 6 0 2 2 2 2 6 and 3.
2. The settings for switch 00 are now shown
on the bottom line of the display.
m
3. Press until the settings for switch 11
are shown.
The setting you need to use is digit 0.
4. If you wish to change the setting, press 0.
5. Finish: Yes Function.
64
m
until the
REMOTE ID
YES TO SET
NO
REMOTE ID
YES OR CLR
0000
REMOTE ID
YES OR CLR
6754
USER PARAMETER
DEFAULT:
SWITCH00:
SWITCH00:
SWITCH11:
Digit 0
0: The feature is disabled.
1: The feature is enabled.
ADVANCED FEATURES
PREVIOUS ↑
NEXT ↓
TO CANCEL
• NO
• NO
PRINT LIST →
01000000
YES TO END ↓
01000000
00000000
00000000
↑