Ricoh fax4700l Operator's Manual page 197

LOOKING AFTER THE MACHINE
5. Change the paper size plate (located at
the front of the feed unit).
To remove an existing plate, push in the
tab at the base while lifting the plate out
from above (see diagram). Insert a plate
with the appropriate paper size en-
graved on the front.
6. Fan the paper. Make sure the edges are
uniformly aligned and place the paper
into the feed unit with the side on wish
you wish to print face up. Check the pa-
per fits under the metal corners.
Do not fill up the cassette past the
load limit marker.
7. If there is space between the paper and
fences, the paper will not be fed prop-
erly. To avoid this, carefully move in
each fence until it is flush with the paper.
8. Replace the feed unit to its original posi-
tion.
186