Ricoh fax4700l Operator's Manual page 115

RECEPTION
3. Yes.
4. Input the Memory Lock ID that you will be
using. Example: 6 7 5 4 from the ten key
pad.
5. Store the ID: Yes and Function.
Editing the Memory Lock ID
1. Function 6 0 2 2 2 2 6 and 1.
2. Press until the screen is as shown
m
opposite.
3. Yes.
4. No and input a new number.
5. Yes and Function.
Switching Memory Lock On/Off
Before you can use Memory Lock, you have to switch it on using Function 62.
After you switch Memory Lock on, <MEMORY LOCK> will appear on the display
when the machine is in standby mode.
Note: If you switch Memory Lock on, Forwarding will be automatically disabled.
1. Function 6 0 2 2 2 2 6 and 2.
2. Scroll through the features with
screen is as shown opposite.
104
MEMORY LOCK ID
ID SETTING
_
MEMORY LOCK ID
YES OR CLR
6754
OWN ANALOG NUMBER
YES TO SET
NO
MEMORY LOCK ID
YES TO SET
NO
MEMORY LOCK ID
YES OR CLR
6754
MEMORY LOCK ID
YES OR CLR
5478
PSTN LINE TYPE
until the
m
MEMORY LOCK
ADVANCED FEATURES
YES TO END
• NO
PREVIOUS ↑
NEXT ↓
TO CANCEL
PREVIOUS ↑
NEXT ↓
TO CANCEL
• NO
• NO
SELECT
DP TT
YES TO END ↓
SELECT
ON OFF
YES TO END ↓
← →
↑
← →
↑