Ricoh fax4700l Operator's Manual page 43

SENDING A FAX MESSAGE
Home Position Setting Adjustments
For the contrast, resolution, and halftone, you can select whether the settings
return to home position at the end of transmission (in a new machine, they do).
Also, you can change the home positions of these settings.
If you need other adjustments, contact a service representative.
The procedure is as follows (see page 11 if you need more information about the
User Parameter settings adjustment procedure).
1. Function 6 0 2 2 2 2 6 and 3.
At this time, you can print a User Parameter
List if you press
2. The settings for switch 00 are now shown
on the bottom line of the display.
The settings that you may need to change are those for digits 0, 1, 2, 3, 4, 5,
6, and 7. The functions of these are as follows.
Digit
0 Stamp
Contrast home position
1 Digit 3 Digit 2 Digit 1 Setting Digit 3 Digit 2 Digit 1 Setting
2 0
3
0
0
Resolution home position
Digit 5 Digit 4
4
0
5
0
Tramsmission mode home position
6
0: Memory transmission*
7 Halftone on/off home position
3. If you wish to change one of the settings, press the key on the ten key pad that
corresponds to the digit that you wish to change.
Example: 3 from the ten key pad. The value of digit 3 changes.
4. Finish: Yes and Function.
32
and Start.
k
0: Off*
0 0 Normal*
0 1 Lighten
1 0 Darken
Setting
0 Standard*
1 Detail
1: Immediate transmission
USER PARAMETER
DEFAULT: 01000000
SWITCH00: 01000000
SWITCH00: 0000 0000
Digit
The digits are numbered from 7 to 0;
the setting of digit 7 is shown at the left
side of the display and digit 0 is at the
right.
Purpose
1: On
1 X X Do not use
Digit 5 Digit 4
1 0
1 1
0: Off*
ROUTINE OPERATION
PRINT LIST →
↑
YES TO END ↓
7654 3210
this setting
Setting
Fine
Do not change
these settings.
1: On