Ricoh fax4700l Operator's Manual page 122

ADVANCED FEATURES
3. Type in an RTI, CSI or G4 TID, then press
Yes.
Label input and editing: see page 4.
4. Either:
Store this RTI as a wild card: Yes.
Otherwise: No.
5. Either:
Enter another RTI, CSI or G4 TID: Go to step 3.
Finish: Function.
6. Scroll through the stored RTIs/CSIs/G4 TIDs on the screen with m.
It is not possible to edit an RTI/CSI/G4 TID; if you wish to do so, you must
delete the incorrect entry and re-input it.
To delete the displayed RTI/CSI/G4 TID: Clear. Go to step 2.
When you have finished: Function.
Note: When you program a G4 TID, program "Country Code" "-" "Telephone
Number" "=" "Terminal ID Code". Program "-" and "=" in the way to store symbols.
Selecting Which M essages to Accept
You can select one of the following two things.
Only accept incoming messages from the specified senders whose RTI/CSI's
are programmed.
Accept all incoming messages except those from the Specified Senders whose
RTI/CSI/G4 TID are programmed.
1. Function 6 0 2 2 2 2 6 and 3.
The settings for switch 00 are now
shown on the bottom line of the display.
AUTHORIZ. RX
STORE AS WILD CARD? YES
XYZ. CO.
AUTHORIZ. RX ENTER RTI/CSI
NO TO CANCEL
_
USER PARAMETER PRINT LIST
DEFAULT: 01000000
YES TO END ↓
SWITCH00: 01000000
RECEPTION
•
NO
ABC
→
↑
111