Ricoh fax4700l Operator's Manual page 457

RECEPTION
5. until the RTI/CSI/G4 TID that you wish
to delete appears.
To delete the RTI/CSI/G4 TID: Clear,
then go to step 4.
It is not possible to edit an RTI/CSI/G4 TID; if you wish to do so, you must
delete the incorrect label and store a new one.
CAUTION: If you delete all the RTIs, CSIs and G4 TIDs for a forwarding
station, you must also delete the forwarding station (see step 3). If
you do not do this, all incoming messages will be forwarded to
that station.
6. Type in an RTI, CSI or G4 TID, then press
Yes.
Inputting labels: see page 220.
7. Either:
Store this RTI as a wild card: Yes.
Otherwise: No.
8. Either:
Input another RTI/CSI/G4 TID for this forwarding station: go to step 6.
Finish working on this forwarding station: No. Go to step 4.
Finish: Function.
Selecting Which Messages to Forward
You have to select one of the following two things.
Forward all incoming messages from specified senders.
or
Forward all incoming messages except those from specified senders.
1. Function 6 0 2 2 2 2 6 and 3.
The settings for switch 00 are now
shown on the bottom line of the display.
2. Press until the settings for switch 08 are
shown.
The settings that you need to change
are digit 6 (double underline) and 7
(single underline).
112
ADVANCED FEATURES
FORWARDING SELECT _
NO. 02 DEST.0
1.RTI PROG 2.RTI
FORWARDING
STORE AS WILD CARD? YES
XYZ. CO.
USER PARAMETER
DEFAULT: 01000000
SWITCH00: 01000000
SWITCH 08: 0000 0000
YES TO END
• NO
PRINT LIST →
↑
YES TO END ↓