Ricoh fax4700l Operator's Manual page 38

ROUTINE OPERATION
If your machine is behind a PBX, dial the access code, then a pause, then the telephone
number. For an international number, place a pause after the country code. To input a pause,
press the Pause key.
5. Yes.
6. Either:
Dial another number: Go to step 4.
Press Start.
The machine will dial the first destination (or, if you selected Send Later, it will
return to standby mode and the fax message will be sent at the time that you
selected).
NOTE: In theory, you can send the same fax message to up to 132 different
destinations using the above procedure. However, this number
depends on how many numbers are currently waiting in memory to be
dialed. See the table on page 303 for more information concerning the
limitations to this feature.
Check your Destinations Before Dialing
If you wish to send a fax message to more than one location, you can scroll
through the list of telephone numbers that you have input so far to check whether
you have missed any or entered any wrong numbers.
This feature is useful when using the features such as Broadcasting, Transfer
Request, and Polling Reception.
Cross-reference
Broadcasting: see page 26.
Polling Reception: see page 140.
1. Press 0 7.
m
The number after DEST shows how
many numbers you have input so
far.
2. Use the arrow to scroll through the list
m
of destinations that you have already in-
put.
To cancel a destination that you have
input by mistake: No.
To finish checking: Yes.
MEMORY TRANS.
Transfer Request: see page 58.
CHECK DEST.
n
CHECK DEST.
n
SENDING A FAX MESSAGE
OPTIONS
ENTER FAX NUMBER
_
PRESS YES OR NO
01 XYZ CO. NEW YORK
DEST.:2
PRESS YES OR NO
ABC COMPANY
DEST.:2
↓
↓
27