Troubleshooting
Error Messages
The following messages may appear while you are operating or programming
the machine.
Message
No Files Exist
4
Cannot Combine : (currently se-
lected function)
This Key is in Use as a Group Dial This Quick Dial key has a Group stored in it.
This Key is in Use as a Program
This Key is in Use as a Quick Dial This Quick Dial key has a Quick Dial stored in it.
This Key is in Use as an Auto Doc-
ument
This Key is Not Programmed
This Speed Dial No. is Not Pro-
grammed
This Dest. is Already Selected
Insert Pause "-" After Area Code
Communication Failed
Please Change The Remote ID.
Load Paper
Clear Misfed Original(s)
Clear Misfed Paper
Close Front/Right Cover
Close Lower Right Cover
98
Causes and Solutions
One of the following:
• There are no documents in memory waiting for trans-
mission.
• Incorrect file number is entered. Check the file number
and try again.
• No polling reception operations have been pro-
grammed.
Appears when you attempt to select a function that cannot
be used in combination with another currently selected
function.
This Quick Dial key has a Keystroke Program stored in it.
This Quick Dial key has an Auto Document stored in it.
One of the following:
• This Quick Dial key does not contain a number.
• This Quick Dial key does not contain a Keystroke Pro-
gram.
This Speed Dial number does not contain a number.
One of the following:
• This number is already included in this Group.
• The same destination was specified more than once.
You must add a pause after your area code when you input
your fax terminal's own telephone number.
A communication was not successful.
The Requesting Party entered the wrong Remote ID five
times successively while making a Remote Transfer Re-
quest to the Transfer Station (your machine).
Paper is loaded in none of the paper trays.
A original is jammed in the ADF.
Paper is jammed in the printer.
The front cover or right cover is not closed properly.
The lower right cover is not closed properly.