Ricoh fax4700l Operator's Manual page 19

ON/OFF SWITCHES AND USER PARAMETERS
3. Either:
Scroll through the switches with
Then go to step 2.
Finish: Yes and Function.
The user parameter switches are outlined below.
*: Default
Switch 00 - Home position settings
Digit
Stamp
0
1: On (successfully scanned documents will be marked)
Contrast home position
1 Digit 3 Digit 2 Digit 1 Setting Digit 3 Digit 2 Digit 1 Setting
2 0
3 0
0
Resolution
4
5
Transmission mode
6
7 Halftone
Switch 01
Digit
0 to 6 Do not change these settings.
If you change any of the contrast, resolution, transmission mode, stamp, or halftone
settings before making a transmission, then:
7
0: The setting(s) will not return to the home position after the transmission.
1: The setting(s) will return to the home position after the transmission.*
Switch 02 - Printing of various items on received messages
Digit
Mark to be printed at the receiving side to distinguish messages that are sent from
your machine when it is acting as a forwarding station (Memory card or hard disk
required)
0
0: Off
Center mark
1
The center mark is not printed when the machine is used for making copies
2 Reception time
3 TSI printing
4 Checkered mark
Printing of the Command Information Line (ISDN kit required)
5
This has the same effect as the TTI On/Off setting.
6 Printing the Terminal ID (ISDN kit required)
7 Do not change this setting.
8
i
0: Off *
0 0 Normal *
0 1 Lighten
1 0 Darken
Digit 5 Digit 4 Setting
0 0 Standard*
0 1 Detail
0: Memory transmission*
1: Immediate transmission
0: Off*
Forwarding
Mark
1: On *
HOW TO USE THIS MANUAL
and until the required switch appears.
m
Purpose
1 X X
Digit 5 Digit 4
1
1
1: On
Purpose
Purpose
0: Off*
0: Off*
0: Off*
0: Off
0: Off
0: Off*
Do not use this
setting.
Setting
0 Fine
1 Do not use this.
1: On
1: On
1: On
1: On*
1: On*
1: On