RECEPTION
Rejection of Messages from Unidentified Senders
If you wish, you can make the machine reject incoming messages that require
storage to your machine's memory, if they are not accompanied with an identifier
such as the RTI or CSI. Features that would be affected are Substitute Reception,
Memory Lock, and Confidential Reception, Forwarding, and Action as a Transfer
Station.
The procedure is as follows (see page 11 if you need more information about the
User Parameter settings adjustment procedure).
1. Function 6 0 2 2 2 2 6 and 3.
At this time, you can print a User
Parameter List if you press
The settings for switch 00 are now
shown on the bottom line of the display.
2. Press
until the settings for switch 05 are
m
shown.
The setting that you need to change is
that for digit 1.
3. If you wish to change the setting, press 1
on the ten key pad.
4. Finish: Yes and Function.
Cross-references
Substitute Reception: see page 47. Confidential Reception: see page 99.
Memory Lock: see page 103.
108
and Start.
j
SWITCH05: 0000 0000
Digit 1 (Double Underlined)
0: Messages are not rejected.
1: Messages are rejected.
Forwarding: see page 113.
ADVANCED FEATURES
PRINT LIST →
USER PARAMETER
DEFAULT:
01000000
YES TO END ↓
SWITCH00:
01000000
↑