Ricoh fax4700l Operator's Manual page 70

ADVANCED FEATURES
Cross-reference
Quick Dial and Speed Dial: see pages 285 and 287.
ID Code: see page 56.
1. Make sure that the machine is in standby mode (see page 24).
2. Place your document in the feeder.
3. Either:
Function 1 and 3.
If you cannot use Function 13, you forgot to store, your fax machine's tele-
phone number, or your ID code (Function 61).
If you have installed the ISDN Option kit, you must also program the ma-
chine's Own ISDN G4 and Own ISDN G3 numbers (use Function 61; see
pages 253 and 254). Your G4 Terminal ID and your ISDN subscriber num-
bers for G4 and G3 must also have been stored.
4. Input the telephone number of the first
transfer broadcasting station,
then press Yes.
This machine must be of the same
manufacturer as yours, and it must
be able to act as a Transfer Station.
5. Input the destinations for this transfer
broadcaster.
You must use Quick Dials, Speed Dials,
or Groups that are stored in the transfer
broadcaster. There is a shorthand nota-
tion for this purpose. See the following
examples:
Quick Dial Key 01: # 0 1 Yes.
Speed Dial Code 10: # * 1 0 Yes.
Group 01: # * * 0 1 Yes .
Note: You cannot store the Upgrade Speed
Dial Number.
Telephone Lists: see p. 176.
Groups: see page 286.
MEMORY TRANS.
ENTER FAX NUMBER
_
TRANSFER
TRANSF.1 _
TRANSFER
TRANSF.1 12125551234
RECV 1
_
TRANSFER NEXT NO. OR START
TRANSF.1 12125551234
RECV
_
NETWORKING
↓
OPTIONS
↓
OPTIONS
TRANSF. ↓
59