INTERNET FAXING
Contents
GETTING AQUAINTED
IC FAX Com
WITH NIC FAX
Redirector
GETTING READY
TROUBLESHOOTING
INTERNET FAXING
APPENDIX
USING FUNCTIONS
GLOSSARY
Index
IC FAX Monitor
Transfer Request by Fax
See page 51 of the main Operator's Manual for details on sending a
transfer request by fax.
Specifying an End Receiver Station
Only end receivers whose mail addresses or fax numbers are pro-
grammed as Quick Dial, Speed Dials, or Group Dials on the transfer
station can be specified as end receivers. Data for addressees speci-
fied as end receivers is sent to the mail addresses or fax machines
registered on the transfer station.
Quick Dial
#
Press
and then input the applicable two-digit Quick Dial code.
Example : To specify the end receiver assigned to Quick Dial code
01 on the transfer station.
Enter
:
# 0 1
Speed Dial
Press
#
and then input the applicable two-digit or three-digit
*
Speed Dial.
Example : To specify the end receiver assigned to Speed Dial 12
on the transfer station.
#
1 2
Enter
:
*
Example : To specify the end receiver assigned to Speed Dial 123
on the transfer station.
Enter
:
#
1 2 3
*
Group Dial
Press
#
and then input the applicable two-digit Group Dial code.
**
Example : To specify the end receiver assigned to Group 04 on
the transfer station.
Enter
:
#
0 4
**
81