Ricoh fax4700l Operator's Manual page 331

Programming
Quick Dial
1 Function 31 Yes
Press the Quick Dial Key
2
that you wish to program
3 Enter the telephone number with the Ten key pad
4 Press Yes
5 Input a label using Quick Dial Key (or press No if you don't want to)
6 Switch label insertion on or off using the arrow keys. Press Yes.
7 Press Function to finish
Key Stroke Program
1. Make sure that the machine is in Standby Mode.
2. Place a sheet of paper in the feeder.
3. Select all required features and telephone numbers as you would normally do.
4. Press the Quick Dial key that you wish to store the program in.
5. Press Yes
Copying
1. Press Copy
2. Place your original in the feeder.
3. Input the number of copies you need.
4. Press Start
Changing Files From Memory
1. Memory Transmission Function 21 Yes
Polling Reception
Polling Transmission
2. Input the file number.If you do not know the file number, print a list of files or press the
right arrow until the required file appears
[Memory Transmission/Polling Reception]
3. Press Yes.
4. Press 1.
5. Press Yes.
6. Function.
[Polling Transmission]
3. Press YES (X 2)
4. Function
Function 32 Yes
input the Speed Dial Code that you wish to program
Function 22 Yes
Function 23 Yes
Speed Dial