Ricoh fax4700l Operator's Manual page 148

ADVANCED FEATURES
Note: If you see FILE EXISTS CLEAR? PRESS YES • NO, you already have
a message on Free Polling Standby.
To keep the old message: No. Remove the document from the
feeder.
To erase the old message: Yes.
Secured Polling
1. Place your document in the feeder.
2. Function 1 and 4.
NOTE: If you have not yet stored an ID Code using Function 61, you will be
asked to enter an ID Code. Proceed in the same way as for step 4 in
"Stored ID Override" on the next page.
3. Start.
- Your fax message is stored and held on
polling standby.
Note: If you see SAME ID FILE EXISTS CLEAR? PRESS YES • NO, you al-
ready have a message on Secured Polling Standby.
To erase the old message: Yes. The old message is erased and
your new one is stored.
To keep the old message: No. Input an ID Code in the same way
as for step 4 in "Stored ID Override" below.
Stored ID Override
This procedure will override the ID Code stored in your machine. The override is
only effective for this one transmission.
1. Place your document in the feeder.
2. Function 1 and 4.
MEMORY TRANS.
ENTER FAX NUMBER
_
POLLING TRANS.
PRESS START
MEMORY TRANS.
ENTER FAX NUMBER
_
POLLING TRANS.
PRESS START
OTHER
↓
OPTIONS
↓
OPTIONS
↓
OPTIONS
↓
OPTIONS
137