Ricoh fax4700l Operator's Manual page 556

SOLVING PROBLEMS
OPERATING DIFFICULTIES
Problem
STANDBY MODE
Nothing happens when the
switch is turned on.
SET DOC. OR DIAL NO is
not displayed.
The display does not show
the Ready condition, or the
machine stops during an
operation.
TRANSMISSION
The original is not pulled into
the auto docment feeder.
Check the power cord. Is it properly plugged into the outlet?
•
Plug it in firmly
Switch the power on.
•
If the Power indicator does not light, check that the power
cord is plugged in.
Does CLEAR ORIGINAL or CLEAR COPY appear in the
display ?
•
Clear the misfed paper. See pages 201 and 203.
Does ADD PAPER appear in the display?
•
Load paper into the paper tray. See page 176.
Does CLOSE COVER appear in the display?
•
Close all covers.
Is the Add Toner indicator on?
•
Load a new toner cartridge. See page 182.
You did not feed the document far enough into the feeder.
•
Insert the document into the feeder until it stops.
Retransmit.
Do user maintenance, especially separation pad [A] and roller
[F] (see page 188).
•
If the same problem still exists after user maintenance,
adjust the auto document feeder mechanism
(see page 202).
The telephone line is disconnected.
•
Check that the line is connected properly.
The telephone line type setting is incorrect.
•
Check the telephone line type setting (see page 290).
The dialed number does not contain an access code or a
pause.
•
Include the access number and a pause before the
telephone number.
The dialed number did not have enough pauses between the
access number and the telephone number.
•
Try adding more pauses after the access code.
OPERATING DIFFICULTIES
Required Action
211