Ic Fax Monitor Settings; Ic Fax Monitor Settings; Entering The Administrator Mode - Ricoh fax4700l Operator's Manual

GETTING READY
IC FAX Monitor
SETTINGS
Note 1
• This section contains proce-
dures for making system
settings only. See page 116 of
this Operator's Manual for full
details on using the IC FAX
Monitor.
"IC FAX Monitor"
....................... See to p.116
Note 2
• In using the Administrator
Mode, functions 20 through 40
and the function with the
password of "2222" cannot be
used. While these functions are
used, the Administrator Mode
cannot be entered.
Contents
GETTING AQUAINTED IC FAX Com
WITH NIC FAX Redirector
GETTING READY TROUBLESHOOTING
INTERNET FAXING APPENDIX
USING FUNCTIONS
GLOSSARY
Index
IC FAX Monitor
After completing mail server settings, initial settings, and installation,
you are ready to use IC FAX Monitor to make mail, TCP/IP and other
system settings.
Note 1

Entering the Administrator Mode

Before making system settings you have to first perform the proce-
dure below to enter the Administrator Mode.
Click the [IC FAX Monitor]
You could also open the
to [IC FAX Applications]
Type the IP address or host name into the
box, and then click
The above shows input of the example IP address 192.168.15.16.
Note 2
On the [Connect]
54
icon.
[Start] menu, point to
, and then click
[OK] .
Menu, click [Administrator Mode]
[Programs] , point
[IC FAX Monitor] .
[Host Name] text
[IP Address] or
[Host Name]
[OK]
.