Transfer Request; Transfer Request By Mail - Ricoh fax4700l Operator's Manual

INTERNET FAXING
TRANSFER RE-
QUEST
Note 1
• Only a NIC FAX can be speci-
fied as the transfer requester for a

transfer request by mail.

• See page 51 of the main Opera-
tor's Manual for details on the
operation for transfer request by
fax.
Note 2
• Up to 99 transfer stations can be
specified for each transfer
request.
• Up to 30 end receivers can be
specified for each transfer
station.
• Each transfer station Group is
counted as a single end receiver.
• Up to a total of 100 transfer
stations can be specified by end
receiver specification and Ten-
Key input.
Contents
GETTING AQUAINTED IC FAX Com
WITH NIC FAX Redirector
GETTING READY TROUBLESHOOTING
INTERNET FAXING APPENDIX
USING FUNCTIONS
GLOSSARY
Index
IC FAX Monitor
You can use Quick Dial, Speed Dial, or Group Dial to send to a transfer
station previously assigned to the applicable key or code. There are two
types of transfer request transmission: transfer request by mail and
transfer request by fax (standard transfer request transmission).
The following are some terms you must be familiar with in order to
perform the following procedure.
Transfer requester.......... This is the fax machine performing the
Transfer station .............. This is the fax machine, which is
End receiver .................. This is the fax machine or computer that
Note 1
Transfer Request by Mail
End Receiver
G3 Fax
Transfer Requester
nicfax2@abc.company.com
+Quick Dial (#01) input
NIC FAX 1
nicfax1@abc.company.com
Mail Server
North America
Computer
Note 2
77
transfer request transmission (NIC FAX).
equipped with transfer capabilities, that is
requested to perform a transfer.
receives the mail or fax from the transfer
station.
Computer
Transfer Station
nicfax2@abc.company.com
Router
NIC FAX 2
Printer
LAN
Computer Computer
Computer Computer
Europe
LAN
Printer
Router
Mail Server
Internet