Ricoh fax4700l Operator's Manual page 572

TECHNICAL REFERENCE
Switch 09 - Various
Digit
Memory Lock
0, 1
Disk File
(Optional Hard Disk and Function Upgrade Card are required)
2, 3
4 to 7 Do not change these settings.
Switch 10 Various
Digit
0 Reverse Order Printing
1 Two in One
2 to 6 Do not change these settings
Halftone mode
7
Switch 11 Various
Digit
0 Transfer Request by Tonal Signals
Selecton of tone (PB) or UUI after tone(
1
(When the ISDN kit is installed)
2 to 5 Do not change these settings.
Print the received message when it is acting as a forwarding station.
6
7 Polling standby duration
ON/OFF SWITCHES AND USER PARAMETERS
Purpose
Digit 1 Digit 0 Setting
X 0 Off*
0 1 Messages from senders whose
RTI/CSI/G4 TIDs are programmed
are not printed unless you enter the
Memory Lock ID.
1 1 Messages from senders whose
RTI/CSI/G4 TIDs are not
programmed are not printed unless
you enter the Memory Lock ID.
Digit 3 Digit 2 Setting
X 0 Off*
0 1 Messages from senders whose
RTI/CSI/G4 TIDs are programmed
are stored in the memory disk.
1 1 Messages from senders whose
RTI/CSI/G4 TIDs are not
programmed are stored in the
memory disk.
Purpose
0: Off*
0: Off*
0: Standard Mode*
1: Speed Mode
Purpose
0: Off*
•
) 0: UUI
0: Off
0: Once*
1: On
1: On
1: On
1: Tone*
1: On*
1: Keep
227