Tonal Signals - Ricoh fax4700l Operator's Manual

TRANSMISSION

Tonal Signals

Some organizations offer you special services by telephone, which you can
access by transmitting Touch Tone or DTMF tones. If your phone service provides
only pulse dialing, or if you are calling over a digital network, the ability to
generate Tonal Signals will allow you to access these services.
First, dial the other party. When you are through to the other end, press the tone
dial key and enter the code number that is needed to access the required feature
at the other terminal.
You do not need to press the tone dial key if your machine is set up for dialing in
Tone Dial (DTMF) mode.
Before you can use this feature, you must program one of the User Function Keys
as the Tone key. In the following procedure, suppose that we have already
programmed the F1 key as a Tone key.
Programing the Tone Key
1. Function 3 and 6.
2. Press the User Function Key (F1-F5) that
you wish to program the Tone key into.
3. Press Yes.
4. Either:
If the key is already programmed,
press No, then 0, 4.
If the key is vacant, press 0 and 4.
5. Press Yes and Function.
88
ADVANCED FEATURES
USER FUNCTION PRESS F1 TO F5
PRINT LIST →
F _
NO TO CANCEL
USER FUNCTION ENTER CODE
F 4 CODE: _
NO TO CANCEL
USER FUNCTION YES OR NO
F 4 CODE: 04
TONE KEY