User Function Keys - Ricoh fax4700l Operator's Manual

OTHER

User Function Keys

There are five Function keys (F1 to F5) on the operation panel.
You can program each of these keys with a feature that you wish to use
frequently. There are two ways to do this.
Store a User Function Code in the User Function Key.
Store a Function Program in the User Function Key.
User Function Codes
You can program each of the User Function Keys with one of the following
functions. In a new machine, the User Function Keys F1 to F4 have already been
programmed, as shown in the table below in boldface.
Code
01 Group key
02 Use Economy Transmission
03 Switch TTI On or Off [F3]
04 Send Tonal Signals
05 Batch Transmission on/off
*: Memory Card or Hard Disk required
**: ISDN G4 Kit required
148
Function Code
06 Specified Image Area On / Off
07 Storing a Both Sided Document [F1]
08 Switch Forwarding On/Off *
09 Upgraded Speed Dial key
10 Input a Subaddress (G4 mode only) **
ADVANCED FEATURES
Function