Ricoh fax4700l Operator's Manual page 126

ADVANCED FEATURES
Then press Yes.
See page 25 for how to dial.
Do not use the handset.
5. Either:
If you wish all incoming messages to be forwarded to this station:
Do not store any RTIs/CSIs/G4 TIDs for it.
Instead: Yes.
Then either go to step 2 to program another forwarding station,
or press Function to finish.
If you only wish messages from
certain senders to be forwarded to
this station:
Input their RTIs, CSIs or G4 TIDs
(messages from senders other
than these will not be forwarded to
this station):
Press 1, then go to step 6.
View the RTIs/CSIs/G4 TIDs that
you have stored so far: 2. Go to
step 9.
DEST 1/6 means that there are 6
RTIs/CSIs/G4 TIDs stored so far,
and the first in the list is now dis-
played.
Finish storing RTIs/CSIs/G4 TIDs for this forwarding station and input an-
other forwarding station number: Yes. Go to step 2.
Finish: Function
6. Type in an RTI, CSI or G4 TID, then press Yes.
You can program up to 10 Special
Terminals for each Forwarding sta-
tion and up to 30 Special Terminals
in total.
7. Either:
Store this RTI as a wild card, press
Yes.
Otherwise: No.
8. Either:
Enter another RTI, CSI or G4 TID: Go to step 6.
Finish: No. Go to step 5.
9. Scroll through the stored RTIs/CSIs/G4 TIDs on the screen with
To delete the displayed RTI/CSI/G4 TID: Clear.
When you have finished: No. Go to step 5.
FORWARDING SELECT _
NO. 02 DEST.0
1.RTI PROG 2.RTI
FORWARDING ENTER RTI/CSI
NO TO CANCEL
_
FORWARDING NO TO CANCEL
NO.01 DEST. 1/6
XYZ. CO.
FORWARDING
STORE AS WILD CARD?
XYZ. CO.
FORWARDING ENTER RTI/CSI
NO TO CANCEL
_
RECEPTION
YES TO END
A BC
CLR: CLR
•
YES NO
A BC
m
.
115