Ricoh fax4700l Operator's Manual page 447

RECEPTION
Printing from Memory Lock
If the Receive File indicator is blinking, a message has been stored using
Memory Lock. Print it using the following procedure.
1. Function 5 and 6.
2. Input the Memory Lock ID.
Example: 4 6 3 3 from the ten key pad.
3. Start.
Note: If the Receive File indicator is blinking, an incoming fax message has
been stored in the memory using the Memory Lock feature or
Confidential Reception feature.
To print the message using the Confidential Reception, see page 96.
List of Special
Terminals
(Function 81)
Empty
Empty/Not empty
Not empty
Not empty
102
Memory Lock On/Off
(Function 62)
On
Off
On
On
PRT MEM. LOCK
MEMORY LOCK ID: _
PRT MEM. LOCK
MEMORY LOCK ID:
Lock messages from
Special Terminals, or
Print messages from
Special Terminals
(Function 63)
Either
Either
Listed
Non-listed
ADVANCED FEATURES
ID SETTING
NO TO CANCEL
PRESS START
....
Result
All messages are
locked in memory.
No messages are
locked in memory.
Only messages from
Special Terminals are
locked in memory.
All messages are
locked in memory
except those from
Special Terminals.